If You Have Problems Using the Facsimile Function
This section explains likely causes of and possible solutions for transmission and reception-related problems.
Receiving is impossible though transmission is possible.
print cartridge is empty.
Replace the print cartridge. See Replacing a Print Cartridge
.The type of telephone line does not match the specified settings.
Check the settings. See Selecting the Line Type
.
The machine failed to print received fax documents.
The machine cannot print due to a cause such as running out of paper.
Load paper into the tray. See Loading Paper
.None of the trays contain the right size of paper for printing faxes.
Load paper of the required size in one of the trays.
Sent images are spotty.
The exposure glass, scanning glass, or ADF is dirty
Clean them. See Cleaning
.Make sure that ink or correction fluid is dry before placing originals.Paper Handling Precautions
Document appears blank at the other end.
The original was placed upside down.
Place it correctly. See Setting and Placing Originals.
Both transmission and receiving are impossible.
The modular cable may be disconnected.
Make sure that the modular cord is correctly connected. See Connecting the Machine to a Telephone Line and Telephone.
