Receiving Secure Faxes by Polling Reception
This section explains how to use polling reception to receive faxes that are protected by SEP Code (sub-address and password).
You can use this function together with [Send Later].
Press the [Fax Options] key.
Press the [
] or [
] key to display [4 Polling RX], and then press the [Yes] key.
| 4 Polling RX OK=Yes |
Specify the destination, and then press the [] key.
| No.001=0987654 OK=Yes (Subads.= ) |
Enter the sub address specified by the sender, and then press the [Yes] key.
| Subaddress= OK=Yes |
You can enter the sub-address using up to 20 digits.
Enter the password specified by the sender, and then press the [Yes] key.
| Password= OK=Yes |
You can enter the password using up to 20 digits.
Press the [B&W Start] key.
Press the [B&W Start] key.
The polling reception starts.
The receiver incurs call charges for polling reception.
Make sure the number of digits in the SEP Code matches the specification of the machine from which you are receiving.
