Skip header
Screen reader supported pageStandard
 

Top Page > Specifying and Adjusting the Machine's Operational Settings > Registering Addresses > Deleting a Registered Quick Dial Keys

Deleting a Registered Quick Dial Keys

You can delete the destination registered to a Quick Dial key.

1Press the [Menu] key.

panel keys illustration

The Menu screen appears.

2Press the [Up arrow key] or [Down arrow key] key to display [Program Dest.], and then press the [Yes] key.

Program Dest.?     Up arrow key
 OK=Yes / or 1-3   Down arrow key

3Press the [Up arrow key] or [Down arrow key] key to display [Quick Dial], and then press the [Yes] key.

1 Quick Dial?      Up arrow key
 OK=Yes            Down arrow key

4Press the [Quick Dial] key to which the data you want to delete is registered.

-Select Q. Dial key-
                    

A confirmation screen appears.

5Press the [No] key.

Programmed Save?    
OK=Yes (Edit/Del=No)

6Press the [Left arrow key] or [Right arrow key] key to select [Delete], and then press the [Yes] key.

Edit  *Delete       
 Left arrow key,Right arrow key & Yes          

If you try to delete a destination specified as a transfer destination, a confirmation screen asking whether you want to save the transfer destination appears. To save the destination, press the [Yes] key. To delete the destination, press the [No] key.

A message notifying you that the deletion is complete appears.

7Press the [No] key twice.

The initial screen appears.