Follow the procedure below to check whether the print-head nozzles are clogged up or not by printing a nozzle check test pattern.
Press the [Menu] key.
Press the [] or [
] key to display [Maintenance], and then press the [Yes] key.
Maintenance? ![]() OK=Yes / or 1-9 ![]() |
Press the [] or [
] key to display [Nozzle Check], and then press the [Yes] key.
1 Nozzle Check? ![]() OK=Yes ![]() |
A test pattern is printed.
Press the [No] key twice.
The initial screen appears.
Check the printed test pattern.
Normal
When print-heads are clogged