Energy Saving Functions
If this machine remains idle for a specified period of time or when [Energy Save] (
) is pressed, it enters Sleep mode to further reduce its electrical consumption. This is called "Sleep Mode".
(mainly Europe)The default delay time the machine waits before entering Sleep mode is 45 minutes.
- (mainly Asia)
The default delay time the machine waits before entering Sleep mode is 60 minutes.
(mainly North America)The default delay time the machine waits before entering Sleep mode is 40 minutes.
The machine can print jobs from computers and receive faxes while in Sleep mode.
The time it takes to recover from the energy saving functions and low power consumption in Sleep Mode may differ depending on the machine.
(mainly Europe)Model Name
Power Consumption
Time to Recover from Sleep Mode
Duplex Function
IM C6500
0.74 W
38 seconds
Standard
IM C8000
0.72 W
38 seconds
Standard
(mainly Asia)Model Name
Power Consumption
Time to Recover from Sleep Mode
Duplex Function
IM C6500
0.74 W
38 seconds
Standard
IM C8000
0.72 W
38 seconds
Standard
(mainly North America)Model Name
Power Consumption
Time to Recover from Sleep Mode
Duplex Function*1
IM C6500
0.62 W
42 seconds
Standard
IM C8000
0.74 W
38 seconds
Standard
*1 Achieves ENERGY STAR energy savings; product fully qualifies when packaged with (or used with) a duplex tray and the duplex function is enabled as an option.
You can change the amount of time that the machine waits before entering Sleep mode under [Sleep Mode Timer].
It may take longer than the specified time to enter Sleep mode according to the type of Embedded Software Architecture application installed in the machine.