Main content
Depending on the language selected, some information may not be displayed.
If you wish to view all the information available, please select English.
SP 200/SP 200N
- Important Notice Important
You agree to the terms and conditions of the Driver and Software End User Agreement
Your OS
Please choose your OS
Depending on the language selected, some information may not be displayed.
If you wish to view all the information available, please select English.
Choose your OS
Select driver language
English
Ver.1.05 Released Date: 12/08/2013
Important Notes:
1. In no event shall the company be held liable to customers for damages of
any kind resulting from use or loss of use of this software.
2. The company shall also not be held liable for any disputes between the customer
and third parties resulting from any use or loss of use of this software.
3. Before updating the firmware, install Smart Organizing Monitor and the
printer driver using the CD-ROM provided with the machine.
4. To make sure that a firmware update has successfully completed, print the
configuration page before and after the update.
5. Disconnect FAX/TEL cables from the machine before running a firmware update.
6. Never disconnect the USB cable during a firmware update.
7. Do not make copies, printing, or scanning during a firmware update.
8. If necessary, modify power management settings on your computer in advance so that
the computer will not enter standby or sleep mode during a firmware update.
Update Procedure:
To update the firmware, use the Smart Organizing Monitor from Windows.
1. On the [Start] menu, click [All Programs].
2. Click [Smart Organizing Monitor for SP 200 Series].
3. Click [Smart Organizing Monitor for SP 200 Series Status].
4. If the machine you are using is not selected, click [Select Device...], and
5. then select the machine's model.
6. Click [OK].
7. On the [User Tool] tab, click [Printer Configuration].
8. On the [System] tab, click [Printer Firmware Update...].
9. Click [OK].
10. Specify the location of the DWN file, and then click [Open].
11. After a message is displayed on the Smart Organizing Monitor to indicate that the firmware
update has completed, turn the machine's power Off and then On again.
1. In no event shall the company be held liable to customers for damages of
any kind resulting from use or loss of use of this software.
2. The company shall also not be held liable for any disputes between the customer
and third parties resulting from any use or loss of use of this software.
3. Before updating the firmware, install Smart Organizing Monitor and the
printer driver using the CD-ROM provided with the machine.
4. To make sure that a firmware update has successfully completed, print the
configuration page before and after the update.
5. Disconnect FAX/TEL cables from the machine before running a firmware update.
6. Never disconnect the USB cable during a firmware update.
7. Do not make copies, printing, or scanning during a firmware update.
8. If necessary, modify power management settings on your computer in advance so that
the computer will not enter standby or sleep mode during a firmware update.
Update Procedure:
To update the firmware, use the Smart Organizing Monitor from Windows.
1. On the [Start] menu, click [All Programs].
2. Click [Smart Organizing Monitor for SP 200 Series].
3. Click [Smart Organizing Monitor for SP 200 Series Status].
4. If the machine you are using is not selected, click [Select Device...], and
5. then select the machine's model.
6. Click [OK].
7. On the [User Tool] tab, click [Printer Configuration].
8. On the [System] tab, click [Printer Firmware Update...].
9. Click [OK].
10. Specify the location of the DWN file, and then click [Open].
11. After a message is displayed on the Smart Organizing Monitor to indicate that the firmware
update has completed, turn the machine's power Off and then On again.