- When user authentication management is enabled, an unexpected error (40200010) occurs when pressing the project button on the MFP and scanning cannot be performed.
3) Others
- None
Version 2.5.14.0
1) Supported
- RICOH IM 370/370F/460F/460FTL
2) Fixed
- Authentication fails if the Base DN of the authentication profile contains spaces.
- Failed to install GSNX SSO Option on Cheetah-G3 models.
3) Others
- Updated Amazon Corretto version to 8u382.
Version 2.5.11.0
1) Supported
- RICOH IM C3010/C3510/C2010/C2510/C4510/C4510A/C5510/C5510A/C6010
2) Fixed
- Job data may be corrupted if GSNX SOP optimized (Full Native) application is forced to terminate due to lack of memory or other reasons.
- Notifications are sent to the administrator repeatedly. (Fixes missing in v2.5.10 have been added.)
- GSNX fails to assign a profile to a device when the maximum number of devices registered has been reached.
- GSNX fails to deliver mail on mail servers with enhanced security.
3) Others
- GSNX will not take fax jobs during the time when login is not possible by the device's additional feature, "Time Settings Allowing Operating Machine by Logging in".
- - GSNX can send GSNX embedded application information (server or server-less, fax is enabled or not) to @Remote.
- - The Log4j module used in the GSNX Server and Embedded application has been upgraded from v1 to v2. (Excluding GSNX standard embedded appliccation (Armada))
- - GSNX changes Amazon Corretto version to 8.352.08.1
Version 2.5.10.0
1) Supported
- RICOH IM C530, RICOH IM 7000/8000/9000, RICOH IM CW2200, RICOH IM 2500/2509J/3000/3009/3500/3509/4000/5000/6000 Full Native mode
- Windows 11, Windows Server 2022
2) Fixed
- Local Privilege Escalation vulnerability. After an attacker logs in to the target PC, the attacker can store files to any place even if the attacker only has Standard User permission.
- GlobalScan NX changes Amazon Corretto version to 8.332.08.1.
- Some internal threads cannot be stopped when GlobalScan NX service is stopp
- A notification of FAX delivery error is sent to the administrator even though the device does not receive FA
- Notifications are sent to the administrator repeatedly.
- A device that has GlobalScan NX application does not move to energy-saving mode correctly under certain conditions.
- During the scanning process, the IP address information of the device becomes 0.0.0.0 and an error occurs.
- Switching Output Mode Switch Timer setting on the device will no longer deliver faxes.
- If all of the following cases are met, Failover from the Primary Server to the Secondary Server will occur, resulting in an error notification to administrator and output to the system log.
• Secondary Delivery Server Settings of GlobalScan NX server is configured.
• Remote operation by Remote Panel Opreration unlocks the energy-saving mode of the device.
- If a project name is long, the project name in the button on the Profile screen is hidden.
- If all of the following conditions are met, Image Correction filter fails.
• Workflow Profile includes Image Correction filter.
• Job is input via HotFolder Plugin.
• The file name of the job contains 2Byte characters of Shift-JIS code.
• The file name of the job contains a character containing 0x5C (escape sequence) in the second byte of a Shift-JIS code character.
- Synchronization between the primary and secondary servers fails in cases with a large number of devices registered on the server.
- The configuration screen cannot be displayed on the AdminTool when a large number of replacement tables are registered.
- If a device installed GlobalScan NX is disconnected from the network and then removed from the AdminTool, the distribution operation fails even after the network is restored.
- If a large number of error jobs are generated, the job cannot be re-run.(Serverless Edition Only)
- Rarely Send To Folder errors occur in SOP optimized(Hybrid) application using certain jNQ versions. (Serverless edition Only)
- When multiple LDAP servers are configured in the authentication profile, authentication to a secondary LDAP server succeeds even if authentication fails on the primary LDAP server.
3) Others
- Added an user tool to enhance security. (Modify TLS, Modify Cipher Suites, Modify Public Key Length)
- LDAPS settings added to authentication profiles which authentication method is Active Directory Authentication and Passwordless Active Directory Authentication.
- Added a support tool "ChangeBarcodeRecognitionPriority.zip" to improve barcode recognition.
- Enabled to connect to the server from the AdminTool without "/" at the end of the URL.
- Added a mode to Send To Folder connector to overwrite a file with the same name at the destination.