J080 Appears
Cause:
The paper delivery is delayed and the position correction for the sub-scan registration fails to be performed correctly, resulting in J080.
Occurrence conditions:
This is prone to occur when slippery paper or thick, stiff paper is used.
Solution:
In [Detailed settings] for the custom paper you are using, select 1331: [Jam Detection], and then change [Detect JAM080] in [JAM047/080/097/098/099] to [Off].
When you set 01: [Detect JAM080] in [JAM047/080/097/098/099] to [Off], the printed image may become misaligned at the leading edge.