What You Need
Use only the tools and materials described in this manual. Using other tools or materials could damage the machine or cause injury.
Hex screwdriver
Use this to remove black hexagonal-head screws from the machine.
The hex screwdriver is supplied with the main unit.
Newspaper or other paper
To prevent toner and other stains getting on the floor, spread sheets of paper out where you intend to place the removed parts.
Maintenance Kits
The following maintenance kits are available. The parts to be replaced are different for each type.
Trained Customer Replaceable Unit / Operator Replaceable Unit Type (Set A)
Charger unit
PCU cleaning unit
Photoconductor unit
Each of the above parts is supplied as a group of four that corresponds to the four toner colors.
Cleaning Unit for Intermediate Transfer Belt (ITB cleaning unit)
Paper feed rollers
Paper transfer unit
Blower brush
Snap rings
Screws
Drum setting powder pad applicator
A customer engineer will use this part.
Trained Customer Replaceable Unit / Operator Replaceable Unit Type (Set B)
Fuser unit
Trained Customer Replaceable Unit / Operator Replaceable Unit Type (Set C)
This set is only required for users of Fifth station and will be replaced by the customer engineer.
Charger unit
PCU cleaning unit
Photoconductor unit
Trained Customer Replaceable Unit / Operator Replaceable Unit Type (Set D)
Fuser cleaning unit
Fuser belt smoothing roller
5th Station Replacement Kit Type S14
Only multiple Fifth Station users need this set.
Storage box
Development unit
Development plate
Sub-hopper unit
Sub-hopper plate