08: Finishing: Perfect Binder

For Perfect Binding, correct the positional deviation in the vertical direction (top and bottom) of the front cover and middle paper bundle.

Setting Item	Default Value	Max. Value	Min. Value	Step	Unit
01: Setting	0	5	-5	0.1	mm

Perfect Binding, correct the positional deviation in the horizontal direction (left and right) of the front cover and middle paper bundle.

Setting Item	Default Value	Max. Value	Min. Value	Step	Unit
01: Setting	0	5	-5	0.1	mm

Adjust the right angle of the three sides when cutting a bundle of paper.

Apply this adjustment if the three edges of the deck of paper cut by the perfect binder are not square.

Enter the distance from the square part at each edge.

On Head Edge

On Tail Edge

On Fore Edge

Setting Items	Default Value	Max. Value	Min. Value	Step	Unit
01: Head Edge 02: Tail Edge 03: Fore Edge	0	10	-10	0.1	mm

Setting Items

Default Value

Max. Value

Min. Value

Step

Unit

01: Head Edge

02: Tail Edge

03: Fore Edge

-10

0.1

Adjust the amount of glue for Perfect Binding.

Setting Item	Default Value	Max. Value	Min. Value	Step	Unit
01: Setting	0	0.3	-0.3	0.05	mm