03: Machine: Paper Feed/ Output
0301: Detect JAM048
Set On/Off for JAM048 (detect paper jam by detection error of image position correction mark).
Setting Item | Values | Default Value |
|---|---|---|
01: Setting | Off On | On |
0303: Buffer Pass Unit Fan Activation Setting
Select the fan condition for the Cool Feeding Unit. If the fan is stopped, the mechanical noise would be lower, but there would be a risk of blocking.
Setting Item | Values | Default Value |
|---|---|---|
01: Setting | All Paper/Ream Weights Paper/Ream Weight 3 or Heavier Paper/Ream Weight 4 or Heavier Paper/Ream Weight 5 or Heavier Paper/Ream Weight 6 or Heavier Off | Paper/Ream Weight 3 or Heavier |
The effectiveness of the cooling function degrades upon the fan stopping. It may cause the printed sheets not to get dry, and stick together forming a bundle.
0305: Remaining Paper Output Tray When Misfeed Occurs
When a paper jam occurs, the paper remaining inside the machine is ejected to the specified tray.
Note that when there is paper that is ejected normally on the tray, the remaining paper is stacked over the existing paper on the tray.
Setting Item | Setting Value | Default |
|---|---|---|
01: Finisher Shift Tray 1 02: Stacker Upper Tray 03: Second Stacker Upper Tray | Off On | Off |
0307: Auto Continue Paper Feeding
Specify whether to resume feeding paper automatically when a feeding problem occurs on a specific tray.
Setting Item | Setting Value | Default |
|---|---|---|
01: Tray 1 02: Tray 2 03: 2-Tray LCIT: Bypass Tray 04: 2-Tray LCIT: Tray 3 05: 2-Tray LCIT: Tray 4 06: 2-Tray LCIT: Tray 5 07: 2-Tray LCIT: Tray 6 08: 2-Tray LCIT: Tray 7 09: 2-Tray LCIT: Tray 8 | Off On | Off |