1331: Jam Detection
JAM047/080/097/098/099
Turn on/off detect function for the following jam.
JAM047 (paper scan error)/JAM080 (gap: feed)/JAM097 (skew)/JAM098 (gap: across)/JAM099 (double feed)
Correction for image position gap with across and skew are also turned on/off.
Setting Item | Values |
|---|---|
01: Detect JAM080/02: Detect/Control JAM047/097/098/03: Detect JAM099 | Off On |
JAM097/098 Detect Threshold
Set the threshold value which determines whether a jam has occurred for JAM097 (skew) and JAM098 (image position gap with across feed).
Setting Item | Max. Value | Min. Value | Step | Unit |
|---|---|---|---|---|
04: JAM097 | 10 | 0 | 0.1 | mm |
05: JAM098 | 7.5 | 1.6 |
Paper Edge Detection
Set the illumination level of the image sensor for Image Position Feedback Correction: Gap with Across Feed and Skew Correction.
If JAM047 or JAM097 or JAM098 occurs, increase the value by one step.
Setting Item | Max. Value | Min. Value | Step | Unit |
|---|---|---|---|---|
06: Setting | 5 | 1 | 1 | None |
Registration Gate Home Position
Adjust optimum value to increase the accuracy of Skew Correction depending on paper weight. If the image is highly skewed, adjust the value to [+] direction for thin paper, [-] direction for thick paper.
Setting Item | Max. Value | Min. Value | Step | Unit |
|---|---|---|---|---|
07: Setting | 8 | -8 | 1 | None |