Replenishing the Staples
Contact your consumable supplier and prepare new staples for replenishment when the “Staples are almost out. Replace supply.” message is displayed. Replace the staples after the message prompting replacement is displayed on the control panel.
- When operating the machine, do not put your hand inside the booklet finisher tray of the finisher's staple unit. You may trap your fingers in the machine's gap and injury can result.
Confirming the supplier of consumables
You can check the telephone number for ordering consumables in [Inquiry].
Replenishing the staples
To replenish the staples, press [Replacement procedure] on the "Supplies Replacement Required Soon" or "Supplies Replacement Required" screen, and follow the procedure that is displayed on the screen.
If you cannot raise the upper unit by holding on both ends of the cartridge, there are staples still remaining inside. Continue using the machine without replenishing the staples.