Sending Faxes via Another Machine (Non-fax Equipped Model)
Using the fax function of the main-machine, you can send a fax from a device (sub-machine) that does not have the fax function. You can also confirm or cancel transmitting the Transmission Standby Files stored on the main-machine.
On the Remote Fax screen, send a fax from the sub-machine.
-
Press [Fax] on the Home screen of the sub-machine.
-
Place an original on the scanner.
Setting an Original to Send by Fax on the Scanner -
On the Remote Fax screen, press [Settings] and then specify the scan settings.
Sending a Fax at the Image Quality Suitable for the Original -
After configuring the send settings, specify the destination on the fax screen, and send the fax.
When using the address book, you can select a destination from the address book of the sub-machine.
Basic Procedure for Transmitting Faxes
On the Remote Fax screen, you can confirm and cancel transmission of a Transmission Standby File from the sub-machine.
-
Press [Fax] on the Home screen of the sub-machine.
-
Press [Job Status/Stop] on the Remote Fax screen.
-
Press [Check/Stop TX File] and select [File List] or [Files under Transmission].
-
Check the Transmission Standby Files.
-
All Transmission Standby Files stored on the main-machine are displayed.
-
is displayed in front of the destination for a Transmission Standby File sent from the sub-machine. -
For a document specified with more than one destination, the destination specified first is displayed. Also, only the number of destinations of the unsent faxes is displayed in Dest..
-
-
Select the document to cancel transmission and press [Cancel Sending].