Configuring the IP Address and Other Settings of the Device Server Option
On the control panel of the machine, specify the network information on the device server option to connect to a server on a network segment separate from the network on the mainframe at the same time.
![Illustration of Expanded USB Print Server Unit](../../setup/image/dzw148.gif)
On the Home screen, press [Settings].
![Operation panel screen illustration](../../setup/image/icon_homescreen_en_mts012.gif)
Press [System Settings].
![Operation panel screen illustration](../../setup/image/d0c9pa5402.gif)
Press [Network/Interface]
[Optional Network].
Change the network settings.
When you change the setting of [Machine IPv4 Address] to [Auto-Obtain (DHCP)], the machine obtains the IP address from the DHCP server automatically.
When specifying the settings for the network manually, the setting items and default values are as described below.
Specify them according to the network environment.
Machine IPv4 Address: Specify/192.168.100.100
Subnet Mask: 255.255.255.0
IPv4 Gateway Address: 0.0.0.0
IPv6 Stateless Address Autoconfiguration: Active
DHCPv6 Configuration: Inactive
Effective Protocol
IPv4: Active
IPv6: Inactive
Ethernet Speed: Auto Select
WINS Configuration: On (Primary WINS Server: 0.0.0.0, Secondary WINS Server: 0.0.0.0, Scope ID)
Host Name
After completing the configuration, press [Home] (
).
To print via the device server option, specify the IP address set with the procedure above to install the printer driver.
You can specify the delivery destination for jobs executed from the enhanced print server. This function is available on machines implemented with RICOH Always Current Technology v1.2 or later.