Scanning a Photo, Name Card, Check, and Other Small Sized Original
Place a small sized original on the exposure glass and then specify the size to scan.
Scanning the Original on the Exposure Glass
Using a ruler, measure the vertical and horizontal sizes of the original.
![](../../scanner/image/dzb577.gif)
Press [Scanner] on the Home screen.
![Operation panel screen illustration](../../scanner/image/icon_homescreen_en_mts009.gif)
Press [Send Settings] on the scanner screen.
Press [Scan Size]
[Custom Size].
Enter the values of X and Y that you measured in Step 1 and proceed to the next screen.
![Operation panel screen illustration](../../scanner/image/d0c9pa1052.gif)
While maintaining the same X-Y orientation as shown, place the original on the machine and press [OK].
![](../../scanner/image/dzb578.gif)
Press [Original Orientation] and select [Readable Direction].
![Operation panel screen illustration](../../scanner/image/dzc579.gif)
Specify the scan settings according to the purpose of the scanned data.
Scanning an Original with Suitable Quality and Density
Specifying the File Type or File Name When Scanning a Document
To send the scanned document to an e-mail address, press [Sender] and then specify the sender.
Specify the destination and then press [Start] on the scanner screen.