Guide to Names and Functions of Components

CAUTION

Do not obstruct the machine's vents. Doing so can result in fire as the internal components are overheated.

ADF stands for Auto Document Feeder.

IM C300/C300F/C400F

Auto Document Feeder (ADF)
Lower the ADF over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.
Exposure glass
Place originals face down here.
Control panel
See Names and Functions of the Control Panel.
Front cover
Open to replace the toner cartridge.
Paper tray
Load paper here.
Paper tray unit
Load paper here.
Main power switch
To operate the machine, the main power switch must be on. If it is off, turn the switch on.
Right cover
Open this cover when a paper jam occurs.
Vents
Prevent overheating.
Paper guides
When loading paper in the bypass tray, align the paper guides flush against the paper.
Bypass tray
Use to copy or print on OHP transparencies and label paper (adhesive labels).
Extender
Pull this extender out when loading A4, 8¹/₂ × 11 or larger size paper in the bypass tray.
Lower right cover
Open this cover when a paper jam occurs.

IM C400SRF

Auto Document Feeder (ADF)
Lower the ADF over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.
Exposure glass
Place originals face down here.
Control panel
See Names and Functions of the Control Panel.
Staple cartridge
Staple cartridge for the finisher. Replace the cartridge when the staples run out.
Finisher cover
Open this cover to replace the staple cartridge.
Front cover
Open to replace the toner cartridge.
Paper tray
Load paper here.
Paper tray unit
Load paper here.
Main power switch
To operate the machine, the main power switch must be on. If it is off, turn the switch on.
Right cover
Open this cover when a paper jam occurs.
Vents
Prevent overheating.
Paper guides
When loading paper in the bypass tray, align the paper guides flush against the paper.
Bypass tray
Use to copy or print on OHP transparencies and label paper (adhesive labels).
Extender
Pull this extender out when loading A4, 8¹/₂ × 11 or larger size paper in the bypass tray.
Lower right cover
Open this cover when a paper jam occurs.

IM C300/C300F/C400F

Internal tray 2 guide
Open out and raise the end fence to support large paper.
Internal tray guide
Open out and raise the end fence to support large paper.
- 8¹/₂ × 14 size
  Pull out the guide to position 1.
- A4 or 8¹/₂ × 11 size
  Pull out the guide to position 1, and then push it back to position 2.
Internal tray 2
If you select this as the output tray, copied/printed paper or fax messages are delivered here face down.
ADF's extenders
Raise these extenders to support large paper.
Internal tray
Copied/printed paper and fax messages are delivered here.

IM C400SRF

Finisher shift tray guide
Open out the end fence to support large paper.
Finisher shift tray
Copied/printed/sorted/stapled paper and fax messages are delivered here.
ADF's extenders
Raise these extenders to support large paper.

IM C300/C300F/C400F

Vents
Prevent overheating.
Ethernet port
Use a network interface cable to connect the machine to a network.

IM C400SRF

Vents
Prevent overheating.
Ethernet port
Use a network interface cable to connect the machine to a network.