User GuideIM C300/C300F/C300FLT/C400F/C400SRF/C400FLT

Setting an Original to Send by Fax on the Scanner

Set a fax original in the auto document feeder (ADF) or on the exposure glass, and specify the scan settings such as 2-sided scanning and the original orientation.

  • When you are using the ADF to scan an original, the machine emits a beeping sound and displays a message to notify the user if the first page of the scanned original is mostly blank. This feature allows can prevent you from setting the original facing down by mistake.

  • If the original you want to scan includes a page of a book or a sheet in a size that cannot be set in the ADF, first, scan the page or sheet using the exposure glass, next, scan the rest of the original using the ADF, and then send them all together.

Setting an Original in the Orientation Suitable for Its Size

Place originals in the landscape orientation (Landscape) if the size of the original is A4, B5 JIS (Japanese Industrial Standard), 81/2 × 11, or 81/2 × 14.

Place originals in portrait orientation (Portrait) if the size of the original is A5, 51/2 × 81/2 or smaller.

Note

  • When sending a fax, the image output at the other end depends on the size and orientation of paper used in the receiver's machine. If the receiver does not use paper of the same size and orientation as that of the original, the fax image may be reduced in size, trimmed at both edges, or divided across two or more sheets. When sending an important original, ask the receiver about the size and orientation of the paper in their machine.

  • If an original jams, press [Stop], and then carefully remove the original.

  • When using the Cloud Fax function, you can send A4 originals. Originals larger than A4 are reduced to A4.

Specifying the Scan Size

If you are scanning an original of a size that cannot be automatically detected, or scanning only a part from an original, specify the scan size.

1Press [Settings] on the fax screen.

2Press [Scan Size] and then configure the scan size settings.

Operation panel screen illustration
  • Auto Detect

    IF [Auto Detect] selected and ADF used, horizon side autodetected, vertical side scanned in A4 size. If exposure glass used, original is only scanned in A4 size.

  • Regular Size

    Scans all pages in the specified standard size, regardless of the actual size of the original pages.

  • Programmed Size

    Scans all pages in the preset size, regardless of the actual size of the original pages. It is useful to register the custom sizes you frequently use.

    Sending a Custom Size Original by Fax

Specifying the scan size setting is complete.

Note

  • When scanning an original that exceeds 356 mm in width, set the original in the ADF, and specify [Programmed Size] in [Scan Size].

  • Use Memory Transmission when sending an original that is larger than 800 mm (32 inches) in width. When you are using immediate transmission, a transmission may fail depending on the resolution and destination settings.

  • If the size of the paper specified for printing received pages at the destination is smaller than that of the original, the page will be scaled to fit the paper.

  • The dimensions of the sent image and the image printed at the destination may vary slightly.

Setting 2-sided Originals

To scan both sides of the original automatically, set the original in the Auto Document Feeder (ADF) and specify 2-sided scanning. Specify the page opening orientation and the orientation the original is set so that the pages received at the destination have the proper vertical orientation. Both sides of the original cannot be automatically scanned when using Immediate Transmission.

1Press [Settings] on the fax screen.

2Specify the page opening orientation and the orientation the original is set.

Set the original in the orientation that matches its opening orientation, and specify the original orientation and page opening orientation.

Original

Setting

Orientation in the ADF

Opening orientation

Original Orientation

Page opening orientation (Original Settings)

90 Degrees Counterclockwise

2 Sided: Open to Right/Left

90 Degrees Counterclockwise

2 Sided: Open to Top

Readable Direction

2 Sided: Open to Right/Left

Readable Direction

2 Sided: Open to Top

  • Press [Original Orientation], and select the orientation of the original set in the exposure glass or ADF.

    Operation panel screen illustration
  • Press [Original Settings], and select the opening orientation.

    Operation panel screen illustration

    When scanning a cover sheet or front cover of a book, select [Scan from 2nd Sheet] in [Start 2 Sided Scanning From] to scan only one side of the first sheet.

Specifying the scan settings for a two-sided original is complete.

Note