User GuideIM C300/C300F/C300FLT/C400F/C400SRF/C400FLT

Installing the Printer Driver to Print Using the IPP Port

To print using the IPP port, install the printer driver from the "Devices and Printers" screen on the control panel.

1Display the "Devices and Printers" screen.

Windows 10 (version 1703 or later), Windows Server 2019

  1. On the [Start] menu, click [Windows System] [Control Panel].

  2. Click [View devices and printers].

Windows 10 (earlier than version 1703), Windows Server 2016

  1. Right-click [Start], and then click [Control Panel].

  2. Click [View devices and printers].

Windows 8.1, Windows Server 2012/2012 R2

  1. On the Charm Bar, click [Set] [Control Panel].

  2. Click [View devices and printers].

Windows 7, Windows Server 2008 R2

  1. On the [Start] menu, click [Devices and Printers].

Windows Server 2008

  1. On the [Start] menu, click [Control Panel].

  2. Click [Printer] on [Hardware and Sound].

2Click [Add a printer].

  • For Windows 7 and Windows Server 2008/2008 R2, click [Add a printer] and then [Add a network, wireless or Bluetooth printer].

3Click [The printer that I want isn’t listed].

Driver screen illustration

4Select [Select a shared printer by name], and then enter "http://(machine’s IP address)/printer" or "http://(machine’s IP address)/ipp".

Driver screen illustration

5Click [Next].

6Click [Have Disk...] [Browse...] to specify the driver (INF file), and then click [OK].

  • If the CD-ROM drive is D:\, the file is stored in the following folder:

    Driver

    OS

    Folder

    PCL 6

    32-bit driver

    D:\X86\DRIVERS\PCL6\X86\MUI\DISK1

    64-bit driver

    D:\X64\DRIVERS\PCL6\X64\MUI\DISK1

    PostScript 3

    32-bit driver

    D:\X86\DRIVERS\PS\X86\MUI\DISK1

    64-bit driver

    D:\X64\DRIVERS\PS\X64\MUI\DISK1

  • The downloaded file is stored in the "DISK1" folder.

7Select a printer to install on the [Add Printer Wizard] screen, and then click [OK].

Driver screen illustration

8To specify the printer to use by default, select the check box of the printer, and then click [Finish].