User GuideIM 550/600 series

Scan Settings (Scanner Settings)

This section describes the settings in the [Scan Settings] tab under [Scanner Settings].

How to Use the "Settings"

Setting Items

Description

A.C.S. Sensitivity Level

When specifying [Auto Color Select] in [Send Settings] on the scanner screen, adjust the threshold value for identifying originals to be in black and white or color from five levels.

  • Default: (Level in the center among five levels)

Wait Time for Next Orig.: Exposure Glass

Specify the time to wait after scanning a page before starting scanning of the next page when scanning an original with multiple pages on the exposure glass and sending the scanned images together.

  • Continuous Wait

    The machine waits for the next original to be placed until you press [Scanning finished]. No time limit is imposed.

  • Off

    Transmission starts automatically after scanning a single page in an original.

  • Set Wait Time

    Specify the time to wait for the next original to be placed (3-999 seconds). Transmission starts automatically after the specified time elapses.

    The machine pauses counting down of the waiting time and waits until [Scanning finished.] is pressed in the following cases:

    • When you change the scan condition or other setting

    • When you open the upper cover of the ADF

    • When you press [Interrupt mode] and perform copying operation

    • When a paper jam occurs

  • Default: [Set Wait Time]: [60 seconds]

This setting becomes invalid when [SADF] or [Batch] is selected in [Send Settings][Original Feed Type] on the scanner screen.

Combining the Data of Multiple Scans into a Single File

Wait Time for Next Original(s): SADF

Specify the time to wait after scanning a stack of a multi-page original before starting scanning of the next stack when scanning an original with multiple pages in the ADF and sending the scanned images together.

  • Continuous Wait

    The machine waits for the next original to be placed until you press [Scanning finished.]. No time limit is imposed.

  • Set Wait Time

    Specify the time to wait for the next original to be placed (3-999 seconds). Transmission starts automatically after the specified time elapses.

    The machine pauses counting down of the waiting time and waits until [Scanning finished.] is pressed in the following cases:

    • When you change the scan condition or other setting

    • When you open the upper cover of the ADF

    • When you press [Interrupt mode] and perform copying operation

    • When a paper jam occurs

  • Default: [Set Wait Time]: [60 seconds]

This setting is only invalid when [SADF] is selected in [Send Settings][Original Feed Type] on the scanner screen.

Combining the Data of Multiple Scans into a Single File

Background Density of ADS (Full Color)

Specify the degree of removing the background color from five levels when scanning a magazine or newspaper and removing the background color.

  • Default: (Level in the center among five levels)

Blank Page Detect

Specify the setting to display a warning message and cancel scanning when the first page scanned in an original is blank. This setting is only valid when placing the original in the ADF.

  • Default: [On]

Blank Page Detection Level

Specify the sensitivity to detect a blank page.

  • Default: (Level in the center among seven levels)

Reproduction Ratio

Specify the scaling ratio displayed in [Send Settings][Scan Ratio] on the scanner screen. You can specify a ratio between 25-400%.

Program / Change / Delete Scan Size

Register, change, or delete the size displayed in [Send Settings][Scan Size][Programmed Size] on the scanner screen. You can register up to five settings.