PS Menu

This section describes the settings in the [PS Menu] tab under [Printer Settings].

Setting Items	Description
Job Timeout	You can specify how long the machine waits to cancel printing in seconds (0 to 999 seconds) when job reception is interrupted. You can select the priority of the wait time specified on the printer driver or by command or specified on the control panel. When you select [Use Machine Setting(s)], the wait time specified here will be active. Default: [Use Driver/Command]
Wait Timeout	You can specify how long the machine waits to stop job reception in seconds (0 to 999 seconds) when the end of the job is not detected. You can select the priority of the wait time specified on the printer driver or by command or specified on the control panel. When you select [Use Machine Setting(s)], the wait time specified here will be active. Default: [Use Driver/Command]
Paper Selection Method	You can specify how the paper tray will be selected by specifying the default value for DeferredMediaSelection in PostScript. When [Auto Select] is selected, the default value is "true". The paper tray that matches Paper Setting specified in a print job is selected. When [Select Paper Tray] is selected, the default value is "false". The paper tray is selected according to the media selection of PostScript Language Reference. Default: [Select Paper Tray]
Swtchng. btwn. 1&2 Sided Prt. Func.	You can specify on which side of the paper to print when the PS command is used to perform two-sided printing and the "setpagedevice" command is entered. When [Active] is selected, the machine cancels two-sided printing and prints pages after the command has been entered on the front side of the paper. When [Inactive] is selected, the machine performs two-sided printing and prints pages after the command has been entered on the back side of the paper. Default: [Active]
Data Format	You can specify the data format according to the data format to print, [Binary Data] or [TBCP] This setting is effective when operating the machine with a connection other than parallel. Default: [TBCP]
Resolution	You can specify the print resolution in dots per inches. You can select [300 dpi], [600 dpi], or [1200 dpi]. Default: [600 dpi]
Orientation Auto Detect	You can specify whether to automatically detect the print data orientation. Default: [On]
Font Change Confirmation	You can specify whether to display the confirmation screen when replacing the font type that cannot be printed. When [Do not Display] is selected, the font type is replaced and printing continues without the confirmation screen being displayed. Default: [Display]