Scanning an Original in a Custom Size
Use the following procedure to scan an original in a non-standard size.
Using a ruler, measure the vertical and horizontal sizes of the original.
![Illustration of measuring the sizes of the original](../../scanner/image/dzb574.gif)
Press [Scanner] on the Home screen.
![Operation panel screen illustration](../../scanner/image/icon_homescreen_en_mts009.gif)
Press [Send Settings] on the scanner screen.
Press [Scan Size]
[Custom Size].
Enter the values of X and Y that you measured in Step 1 and proceed to the next screen.
![Operation panel screen illustration](../../scanner/image/bzl2scn-en003.gif)
For X and Y, you can specify 10 mm (0.4 inches) or larger.
While maintaining the same X-Y orientation as shown, place the original on the machine and press [OK].
![Operation panel screen illustration](../../scanner/image/dzc576.gif)
Press
three times to return to the [Send Settings] screen.
Specify the scan settings according to the purpose of the scanned data.
Scanning an Original with Suitable Quality and Density
Specifying the File Type or File Name When Scanning a Document
To send the scanned document to an e-mail address, press [Sender] and then specify the sender.
Specify the destination, and press [Start].