Replenishing the Staples (only for IM 600SRF)

Replace the staples after the message prompting replacement is displayed on the control panel.

Important

Stapling failures or jams may occur if you use a staple cartridge other than that recommended.

Replenishing the staples

Replenish the staples while watching the video displayed on the screen for the procedure.

Press [Watch Video].

To display this screen again, press [Check Status] and then press [Guidance: Add Staples] under the [Maintnc./Inquiry/Mach. Info] tab.

Press the play ( Operation panel screen illustration ) key.

Replenish the staples while watching the video.

Note

If you cannot raise the upper unit by holding on both ends of the cartridge, there are staples still remaining inside. Continue using the machine without replenishing the staples.