User GuideIM 550/600 series

Logging in to Web Image Monitor

Access the management screen of the machine from the Web browser of the computer using the same authentication information as that used when logging in from the control panel.

You can change the login password in Web Image Monitor. Using the tool, not only can you monitor the machine status, but also manage the files stored in the machine.

Using Web Image Monitor

Logging in to the Web Image Monitor from the Computer

1Launch the Web browser.

2Enter "http://(IP address of the machine or host name)/" on the address bar of the Web browser, and then press the Enter key.

3Click [Login].

Web browser screen illustration

4Enter the login user name and password, and then click [Login].

Note

  • Ask the administrator for the Login user name and Login password.

Changing the Login Password Using Web Image Monitor

1Launch the Web browser.

2Enter "http://(IP address of the machine or host name)/" on the address bar of the Web browser, and then press the Enter key.

3Click [Login].

4Enter the login user name and password, and then click [Login].

5Click [Address Book] from the [Device Management] menu.

Web browser screen illustration

6Select the user for whom to change the login password.

7Click [Change].

Web browser screen illustration

8Click [Change] in "Login Password" of "Authentication Information".

Web browser screen illustration

9Enter the new password in the [New Password] box.

10Enter the new password in the [Confirm Password] box.

11Click [OK] three times.