Sending a Fax While Scanning the Original
When using Immediate Transmission, the machine first establishes a connection to the destination and then sends a fax while scanning the original. You can check if the transmission is executed properly on the screen.
Press [Fax] on the Home screen.
![Operation panel screen illustration](../../fax/image/icon_homescreen_en_mts010.gif)
Select [Fax] on the fax screen.
![Operation panel screen illustration](../../fax/image/dzc388.gif)
Press [Settings] and select [Immediate Transmission].
![Operation panel screen illustration](../../fax/image/met3fax-en020.gif)
Configure the scan settings.
Sending a Fax at the Image Quality Suitable for the Original
Place the original in the ADF or on the exposure glass.
Specify the destination, and press [Start].
You can select only one fax destination or IP-Fax destination.
When a connection to the destination cannot be established, select whether to cancel transmission, or switch to Memory Transmission.