User GuideIM 550/600 series

Sending a Custom Size Original by Fax

Register the scan size when scanning and sending a custom size original or only a section of an original.

Note

  • You can program up to 2 scan sizes (Program Size 1 and Program Size 2).

Programming a Custom Size (Settings Screen Type: Standard)

Press [Fax Settings][Scan Settings] and then press [Register/Change/Delete Scan Size] to program custom sizes.

1Press [Settings] on the Home screen.

Operation panel screen illustration

2Press [Fax Settings] on the Settings screen.

Operation panel screen illustration

3Press [Scan Settings][Register/Change/Delete Scan Size] to display the screen for programming custom sizes.

4Press [Registered Size 1] or [Registered Size 2], and then press [Register/Change].

Operation panel screen illustration

5Select [Set] in [X], and then enter the horizontal size.

Operation panel screen illustration
  • To switch the unit, press [mm] or [inch] in [Unit].

6Select the vertical size in [Y], and then press [OK].

7Press [Home] () after specifying the settings.

Note

  • To change the programmed custom size, select the size to change in Step 4.

  • To delete a registered custom size, select the custom size to delete in Step 4, and press [Delete].

Programming a Custom Size (Settings Screen Type: Classic)

Press [Fax Settings][Scan Settings] tab and then press [Program / Change / Delete Scan Size] to program custom sizes.

1Press [Settings] on the Home screen.

Operation panel screen illustration

2Press [Machine Features Settings] on the Settings screen.

Operation panel screen illustration

3Press [Fax Settings][Scan Settings] tab [Program / Change / Delete Scan Size] to display the screen for programming custom sizes.

4Confirm that [Program / Change] is selected, and then press [Program Size 1] or [Program Size 2].

Operation panel screen illustration

5Press [Clear], enter the horizontal size, and then press [#].

Operation panel screen illustration
  • To switch the unit, press [mm] or [inch].

6Enter the vertical size, and then press [OK].

7Press [Home] (Operation panel screen illustration) after specifying the settings.

Note

  • To change the programmed custom size, select the size to change in Step 4.

  • To delete a registered custom size, press [Delete] in Step 4, and select the custom size to delete.

Sending a Document in a Programmed Custom Size

You can select a programmed custom size from [Settings][Scan Size][Programmed Size] on the fax screen.

1Press [Fax] on the Home screen.

Operation panel screen illustration

2Place the original in the Auto Document Feeder (ADF) or on the exposure glass.

Setting an Original to Send by Fax on the Scanner

To change the scan size on the middle page while scanning a document, set an original on the exposure glass.

3Press [Settings] on the Fax screen.

4Press [Scan Size][Programmed Size], and then select the scan size.

Operation panel screen illustration

6After configuring the send settings, specify the destination on the fax screen, and send the fax.

When scanning on the exposure glass, you can change the scan size per page.

Basic Procedure for Transmitting Faxes

Basic Procedure for Sending Internet Faxes

Basic Procedure for Sending IP-Faxes