User GuideIM 550/600 series

Installing the Printer Driver for USB Connection (Windows)

When you connect the machine and the computer with a USB cable, the installer searches for the machine to install the printer driver.

Important

  • Follow the instructions of the installer to connect the USB cable.

Installing the Printer Driver from the CD-ROM

1Set the CD-ROM in the computer.

If the installer does not start automatically, double-click [Setup.exe] in the root directory of the CD-ROM.

2Select a language, and then click [OK].

3Click [Install from Disk].

Driver screen illustration

4Click [USB printer(s)].

5On the "License Agreement" screen, select [I accept the agreement], and then click [Next].

Driver screen illustration

6Select [Add a new printer], and then click [Next].

7Select this machine from among the devices, and then click [Next].

Driver screen illustration

8Disconnect the USB cable from the machine and turn off the power of the machine, and then click [Next].

Printer driver installation starts.

9Following the instructions on the "Auto-detect USB Port" screen, connect the machine and the computer with the USB cable, and then turn on the power of the machine.

Driver screen illustration
  • The search detects the machine connected by the USB cable.

  • If the machine is not detected, click [Stop Auto-detecting]. Even if the connection is canceled, the installation is complete. After the installer screen is closed, the machine is added automatically when it is connected to the computer with the USB cable.

10Click [Finish].

Installing the Printer Driver from the Downloaded File

1Double-click the downloaded file.

2Confirm where to install, and then click [Extract] or [Install].

  • If the "Security Warning" screen is displayed, click [OK].

  • If the "User Account Control" screen is displayed, click [Yes] or [Allow].

3On the "End User License Agreement" screen, select [Agree], and then click [Next].

4Select [USB], and then click [Next].

Driver screen illustration

5Select the machine to use, and then click [Next].

Driver screen illustration

Printer driver installation starts.

6Following the instructions on the "Connect with device" screen, connect the machine and the computer with the USB cable, and then turn on the power of the machine.

Driver screen illustration

The search detects the machine connected by the USB cable.

If the machine is not detected

  • "Cannot connect with device." is displayed. Click [Retry] and perform the procedure again following the instructions on the "Connect with device" screen.

  • If the machine is not detected, click [Cancel Connection]. Even if the connection is canceled, the installation is complete. After the installer screen is closed, the machine is added automatically when it is connected to the computer with the USB cable.

7When the installation is complete, click [Finish].