User GuideIM 550/600 series

Installing the Printer Driver to Print Using the WSD Port

To print using the WSD port, install the printer driver from the "Network" or "Devices and Printers" screen on the control panel.

Installing the Driver under Windows 8.1/10 or Windows Server 2012/2012 R2/2016/2019

1Prepare the printer driver installer.

Set the CD-ROM on the computer or unzip the downloaded driver. If automatic reproduction begins, exit the installer.

2Display the "Devices and Printers" screen.

Windows 10 (version 1703 or later), Windows Server 2019

  1. On the [Start] menu, click [Windows System] [Control Panel].

  2. Click [View devices and printers].

Windows 10 (earlier than version 1703), Windows Server 2016

  1. Right-click [Start], and then click [Control Panel].

  2. Click [View devices and printers].

Windows 8.1, Windows Server 2012/2012 R2

  1. On the Charm Bar, click [Set] [Control Panel].

  2. Click [View devices and printers].

3Select a printer, and then click [Print server properties].

4Click [Add...] on the [Drivers] tab.

Driver screen illustration

5Click [Next] on the "Add Printer Driver Wizard" screen.

6Select the check box of the processor (CPU) of your computer, and then click [Next].

7Click [Have Disk...] [Browse...] to specify the driver (INF file), and then click [OK].

  • If the CD-ROM drive is D:\, the file is stored in the following folder:

    Driver

    OS

    Folder

    PCL 6

    32-bit driver

    D:\X86\DRIVERS\PCL6\X86\MUI\DISK1

    64-bit driver

    D:\X64\DRIVERS\PCL6\X64\MUI\DISK1

    PostScript 3

    32-bit driver

    D:\X86\DRIVERS\PS\X86\MUI\DISK1

    64-bit driver

    D:\X64\DRIVERS\PS\X64\MUI\DISK1

  • The downloaded file is stored in the "DISK1" folder.

8Select the machine you want to use, and then click [Next].

Driver screen illustration

9Click [Finish] [Close].

10Click [Add a printer] on the "Devices and Printers" screen.

11Click [The printer that I want isn’t listed].

Driver screen illustration

12Select [Add a Bluetooth, wireless or network discoverable printer], and then click [Next]

13Select the machine you want to use, and then click [Next].

Driver screen illustration

14To change the printer name displayed on the screen, enter the printer name, and then click [Next].

15To use the printer as a shared printer, specify the shared printer settings, and then click [Next] [Finish].

Installing the Driver under Windows 7 or Windows Server 2008 R2

1On the [Start] menu, click [Computer].

2Click [Network].

The search for the machine starts.

3Right-click the machine, and then click [Install].

Driver screen illustration
  • If "Device driver software was not successfully installed" is displayed, close the message, and then proceed to Step 4.

4On the [Start] menu, click [Devices and Printers].

5Click [Add a printer].

6Click [Add a local printer].

Driver screen illustration

7Select the WSD port on "Use an existing port:", and then click [Next].

Driver screen illustration

8Click [Have Disk...] [Browse...] to specify the driver (INF file), and then click [OK].

  • If the CD-ROM drive is D:\, the file is stored in the following folder:

    Driver

    OS

    Folder

    PCL 6

    32-bit driver

    D:\X86\DRIVERS\PCL6\X86\MUI\DISK1

    64-bit driver

    D:\X64\DRIVERS\PCL6\X64\MUI\DISK1

    PostScript 3

    32-bit driver

    D:\X86\DRIVERS\PS\X86\MUI\DISK1

    64-bit driver

    D:\X64\DRIVERS\PS\X64\MUI\DISK1

  • The downloaded file is stored in the "DISK1" folder.

9Select the machine you want to use, and then click [Next].

Driver screen illustration

Follow the instructions on the screen to proceed with the installation.

10When the installation is complete, close all windows.

Installing the Driver under Windows Server 2008

1On the start menu, click [Network].

The search for the machine starts.

2Right-click the machine, and then click [Install].

3Click [Locate and install driver software (recommended)].

  • If [Don't search online] is displayed, click the display, and then proceed to Step 4.

4Click [Browse my computer for driver software (advanced)].

5Click [Browse...] to specify the driver (INF file), and then click [Next].

  • If the CD-ROM drive is D:\, the file is stored in the following folder:

    Driver

    OS

    Folder

    PCL 6

    32-bit driver

    D:\X86\DRIVERS\PCL6\X86\MUI\DISK1

    64-bit driver

    D:\X64\DRIVERS\PCL6\X64\MUI\DISK1

    PostScript 3

    32-bit driver

    D:\X86\DRIVERS\PS\X86\MUI\DISK1

    64-bit driver

    D:\X64\DRIVERS\PS\X64\MUI\DISK1

  • The downloaded file is stored in the "DISK1" folder.

6When the installation is complete, close all windows.