User GuideIM 550/600 series

Installing the TWAIN Driver

To use the scanner of the machine in an application that supports TWAIN, install the TWAIN driver and register the machine in "Network Connection Tool".

Important

  • To import images into the computer directly, you need to install both the TWAIN driver and the application that supports TWAIN.

Installing the Driver

1Start the installer of the TWAIN driver.

To start the installer from the CD-ROM

  1. Set the CD-ROM in the computer.

    • If the installer does not start automatically, double-click [Setup.exe] in the root directory of the CD-ROM.

  2. Click [TWAIN Driver].

    Driver screen illustration

To execute the downloaded file

  1. Double-click the downloaded file.

  2. Specify the location of the unzipped file, and then click [OK].

    • If the "Security Warning" screen is displayed, click [OK].

    • If the "User Account Control" screen is displayed, click [Yes] or [Allow].

2On the setup screen, click [Next].

3On the "License Agreement", select [I accept the terms of the license agreement], and then click [Next].

4On the "Select Program Folder" screen, click [Next].

Driver screen illustration

Installation starts.

5After completing the installation, click [Finish].

Setting the Connecting Scanner

To use only the scanner of the machine, or if the machine is not detected automatically, register the machine in "Network Connection Tool".

1On the application menu of the computer, click [Network Connection Tool] on [TypeGeneric TWAIN V5].

Driver screen illustration

2Select the [Specify scanner(s) to use.] check box, and then click [Scanner Search/Registration].

Driver screen illustration

The tool searches for the scanner.

3On the "List of Search Results" screen, select the machine and click [OK].

Driver screen illustration

If the machine is not detected, cancel search, click [Manual Entry], and then enter the IP address of the machine.

4Confirm that the machine is added to "List of Specified Scanners", and then click [OK].