User GuideIM 550/600 series

Installing the Printer Driver by Using Device Software Manager Installer

Device Software Manager is a support utility for driver installation in Windows. Device Software Manager helps you to detect the latest driver via the internet automatically according to the computer you are using and install it with a simple procedure.

Important

Installing Device Software Manager from the CD-ROM

1Set the CD-ROM in the computer.

If the installer does not start automatically, double-click [Setup.exe] in the root directory of the CD-ROM.

2Click [Install Online].

Driver installer illustration

3Select [I accept the agreement] on the "License Agreement" screen, and then click [Install].

4On the "Quality Improvement Program" screen, select [I will participate in the Quality Improvement Program] or [I will not participate in the Quality Improvement Program], and then click [Next].

5On the "Driver Update Notification Setting" screen, specify whether to display the message about the driver update, and then click [Next].

The process of installing Device Software Manager starts.

6Select the connection between the machine and computer, and then click [Next].

Driver installer illustration
  • Network: Search for devices connected to the network.

  • USB: Following the instructions on the "Connection with device" screen, connect the machine and the computer with the USB cable to search for the machine.

7Select this machine from among the detected devices, and then click [Next].

Driver installer illustration

The installation of the driver starts.

  • If "Could not verify publisher" is displayed at the beginning of installation, continue the installation. There is no problem with the started installer that is downloaded from the manufacturer's website. Continue the installation.

  • When you connect the machine and the computer with a USB cable, follow the instructions on the installer screen.

    Driver screen illustration

    If the machine is not detected, click [Cancel Connection]. Even if the connection is canceled, the installation is complete. After the installer screen is closed, the machine is added automatically when it is connected to the computer with the USB cable.

8When the installation is complete, click [Finish].

Note

  • After completing the installation, Device Software Manager icon is created on the desktop screen.

  • You can update the installed printer driver with Device Software Manager.

  • Updating the Driver (Windows)

Installing Device Software Manager from the Downloaded File

1Double-click the downloaded file.

2Select [I accept the agreement] on the "License Agreement" screen, and then click [Install].

3Click [Next] on the "Welcome to the Device Software Manager Setup Wizard" screen.

4On the "Quality Improvement Program" screen, select [I will participate in the Quality Improvement Program] or [I will not participate in the Quality Improvement Program], and then click [Next].

5On the "Driver Update Notification Setting" screen, specify whether to display the message about the driver update, and then click [Next].

The process of installing Device Software Manager starts.

6After completing the installation, select the [Run Device Software Manager] check box, and then click [Finish].

The installation of Install Online is complete. Next, install the printer driver.

7On the "End User License Agreement" screen, select [Agree], and then click [Next].

8Select the connection between the machine and computer, and then click [Next].

Driver installer illustration
  • Network: Search for devices connected to the network.

  • USB: Following the instructions on the "Connection with device" screen, connect the machine and the computer with the USB cable to search for the machine.

9Select this machine from among the detected devices, and then click [Next].

Driver installer illustration

The installation of the driver starts.

  • If "The publisher could not be verified" is displayed at the beginning of installation, continue the installation. There is no problem with the started installer that is downloaded from the manufacturer's website. Continue the installation.

  • When you connect the machine and the computer with a USB cable, follow the instructions on the installer screen.

    Driver screen illustration

    If the machine is not detected, click [Cancel Connection]. Even if the connection is canceled, the installation is complete. After the installer screen is closed, the machine is added automatically when it is connected to the computer with the USB cable.

10When the installation is complete, click [Finish].

Note