System
This section describes the items that are available on [System].
Items | Description |
---|---|
Print Error Report | Specify whether to print an error report when a machine or memory error occurs.
|
Auto Continue | Specify whether to continue printing after a system error occurs. To enable [Auto Continue], specify how long the error message is displayed before printing is resumed.
|
Memory Overflow | Specify whether to print a memory overflow error report.
|
Error Display Setting | Specify errors to display errors if they occur during internal data processing.
|
AutoCncl for Prt Job onErr | Specify whether to automatically cancel a print job if an error occurs as well as the jobs that have been received before the error.
|
Printer Language | Specify the printer language.
|
Sub Paper Size | Specify whether to treat A4 and Letter (81/2 × 11) size paper as the same size.
|
Default Printer Lang. | Specify the printer language to be used when the machine fails to detect the printer language.
|
Low Power Mode Timer |
|
Sleep Mode Timer | Sleep Mode Timer When [On] is selected for [Sleep Mode Timer On/Off], specify the time to wait before entering Sleep mode for power saving. If the machine is left unused for a certain period of time, it first enters low-power mode and eventually enters Sleep mode.
|
Weekly Timer | Specify whether to enable or disable the weekly timer that switches the machine to and from Off mode or Sleep mode on a weekly basis. When [Daily (Web Preset Time)] or [Day of Week(Preset Time)] is selected, you can specify detailed settings for Weekly Timer using Web Image Monitor.
|
Weekly Timer Code | Specify whether to enable or disable the weekly timer code. When [On] is selected, you are prompted to enter the password in the event that the machine recovers from Off mode or Sleep mode.
|
Main Power On by Remote | Specify whether to turn on the machine's main power from a computer on the network using Wake-On-LAN.
|
Engy Sv Md to Dsbl Prt Srv | Specify whether to enable or disable Energy Saver mode while using the USB device server. When the machine is in Energy Saver mode, a print server is not supplied with the power source and you cannot print.
|
Ready State After Printing | Specify the state to which the machine returns after printing documents during Sleep Mode.
|
Print Compressed Data | Specify whether to whether to uncompress and extract job data compressed in the GZIP format before printing.
|
Memory Usage | Specify the memory priority of the machine. Select which memory has priority, Font Priority or Frame Priority.
|
Spool Printing | Specify whether to complete spooling before starting to print. [Spool Printing] appears only when the optional hard disk is installed.
|
RAM Disk | If the optional hard disk is not installed for PDF Direct Print, specify a value of 2 MB or higher.
|
Auto E-mail Notify | Specify whether to send the error notification to a preset e-mail address.
|
Silent Mode | Specify whether to enable Silent mode for the machine. When [On] is selected, you can minimize operational sounds by reducing the productivity. Enable Silent Mode if you prefer quietness over productivity.
|
Main Pwr Off if Ntwrk Disc (mainly Europe) | Specify whether to switch to Off mode if all Ethernet connections and USB2.0 connections are disconnected for more than two hours.
|
Display Network Status | Specify whether to display a warning screen if the machine is not connected to the network.
|
Serial No. of Machine | You can check the serial number of the machine. |