Skip header
 

Solution:

Adjust the image scaling.

1Select [Machine: Image Position] in [Advanced Settings] for the custom paper in use and adjust the following for 1101: [Image Position].

  • To adjust the horizontal scaling

    [With Feed] of [Image Magnification: Side 1]

  • To adjust the vertical scaling

    [Across Feed] of [Image Magnification: Side 1]

Press [plus] to increase the scaling and [minus] to decrease it.

2Print the image. Is the problem resolved?

Yes

Finished!

No

If the problem persists even though you have adjusted the setting to its maximum and minimum values, contact your service representative.