Previous
In the [Main Unit: Image Quality] group on the [Adjustment Settings for Operators] menu, select 0202: [Adjust Image Density] and execute [Adjust Image Density].
Print the image. Is the problem resolved?
Yes |
Finished! |
No |
Go to the next step. |
Increase the value by 1 in 0204: [Maximum Image Density].
Select 0202: [Adjust Image Density] and execute [Adjust Image Density].
Print the image. Is the problem resolved?
Yes |
Finished! |
No |
Repeat Steps 3 to 5. If the problem persists even though you have increased the value to 5, contact your service representative. |
