Previous
Before you perform the solution procedure, make sure that the use rate of the replacement parts does not exceed 100%. To check this, select 0516: [Display Parts Life Counter] of the [Main Unit: Maintenance] group in [Adjustment Settings for Operators].
For details about checking the counter, see Adjustment Item Menu Guide.
If the [Display Parts Life Counter] has exceeded 100%, replace the corresponding part.
For details about replacing the parts, see Replacement Guide.
In the [Main Unit: Image Quality] group on the [Adjustment Settings for Operators] menu, select 0202: [Adjust Image Density] and execute [Adjust Image Density].
Print the image. Is the problem resolved?
Yes |
Finished! |
No |
Go to the next step. |
Print 100 full-page, solid-fill A4 or LT sheets. Is the problem resolved?
Yes |
Finished! |
No |
Reload with new paper. |
Print the image. Is the problem resolved?
Yes |
Finished! |
No |
Replace the paper with smoother paper. |
If the problem persists, contact your service representative.
