Previous
Transfer Timing Roller/Paper Transfer Roller/Fusing Belt/Cooling Roller After Fusing/Paper Output/Switchback: Entrance Roller/Switchback: Exit Roller
Adjust the speed of each motor.
Decurler: Correction Off
Adjust the paper feed speed of the decurler unit when 0310 [Correct Output Paper Curl] in the [Adjustment Settings for Operators] menu is set to "Off".
Press [
] to increase the speed and [
] to reduce it.
Decurler: Correction Weak
Adjust the paper feed speed of the decurler unit when 0310 [Correct Output Paper Curl] in the [Adjustment Settings for Operators] menu is set to "Small".
Press [] to increase the speed and [] to reduce it.
Decurler: Correction Strong
Adjust the paper feed speed of the decurler unit when 0310 [Correct Output Paper Curl] in the [Adjustment Settings for Operators] menu is set to "Large".
Press [] to increase the speed and [] to reduce it.
Setting Item |
Max. Value |
Min. Value |
Step |
Unit |
|---|---|---|---|---|
01: Transfer Timing Roller/02: Paper Transfer Roller |
1.0 |
-1.0 |
0.1 |
% |
03: Fusing Belt |
10.0 |
-10.0 |
||
04: Cooling Roller After Fusing/05: Paper Output |
5.0 |
-5.0 |
||
06: Switchback: Entrance Roller/07: Switchback: Exit Roller |
3.0 |
-3.0 |
||
08: Decurler: Correction Off |
7.5 |
-1.0 |
0.5 |
|
09: Decurler: Correction Weak |
||||
10: Decurler: Correction Strong |
