Previous
Adjust the nip width between the fusing belt and the pressure roller.
You can reduce creases produced during printing.
The default setting is 2. To reduce creases, decrease the setting value.
When printing envelopes, the recommended setting value is 4.
Decreasing the setting value may result in insufficient toner fusing, causing toner to shed from the envelopes (cold offset).
Setting values from 1 to 4 are displayed. The nip width increases in the order of 4, 3, 1, 2, where setting value 4 is the smallest and 2 is the largest.
Setting Item |
Max. Value |
Min. Value |
Step |
Unit |
|---|---|---|---|---|
01: Nip Width |
4 |
1 |
1 |
None |
