Top Page > Adjustment Item Menu Guide: TCRU/ORU > Details of Menu Items in Adjustment Settings for Operators > [Main Unit: Maintenance] > 0505 [Developer Fill: Result]

0505 [Developer Fill: Result]

Previous Next

Display the result of the developer fill.

If the developer replenishment fails, check the displayed code and troubleshoot the problem accordingly. If countermeasures do not work or a code that is not on the list is displayed, contact your service representative.

For details about filling/discharging developer, see the Replacement Guide.

Code	Status	Causes	Solutions
1	Succeeded (developer replenished)	-	-
2	Developer not discharged	Developer in the developer unit has not been discharged.	A new developer bottle is required. Contact your service representative.
3	Developer not replenished	The developer bottle is not attached to the inlet. The developer bottle is attached to the inlet, but its seal has not been pulled out.	Attach a new developer bottle to the inlet, pull out the seal, and then try the operation again.
9	Replenishment quit forcefully	The front covers have been closed. The power was turned off during the operation.	Open the front covers, turn on the main power, and then try the operation again.