Adjust the suspension time while the feeding sensor being turned on.
To prevent multi-feeding, adjust the paper separation time for feeding paper when using three-tray wide LCT, LCT, and multi bypass tray.
Adjust this parameter if multi-feeding problems occur frequently.
Press [] to increase the paper separation time or [
] to decrease.
Setting Items |
Default Value |
Max. Value |
Min. Value |
Step |
Unit |
---|---|---|---|---|---|
[Tray 4: Wide LCIT] |
0 |
1000 |
0 |
5 |
msec |
[Tray 5: Wide LCIT] |
|||||
[Tray 6: Wide LCIT] |
|||||
[Tray 4: LCIT] |
|||||
[Tray 5: LCIT] |
|||||
[Tray 6: LCIT] |
|||||
[Tray A] |
Be aware, however, that increasing the paper separation time increases the reverse roller-paper contact time, leading to a higher risk of paper scratching.
Also, note that optimum printing speed might not be possible if the paper separation time is increased.