Previous
Adjust skew detection level.
By increasing the permissible range of skew, you can make the machine print without stopping for skews within the permissible range.
This is enabled only if 0304 [Skew Detection] is set to [On].
Press [
] to increase the permissible range or [
] to decrease it.
Setting Items |
Default Value |
Max. Value |
Min. Value |
Step |
Unit |
|---|---|---|---|---|---|
[Tray 1] |
3.0 |
7.5 |
1.6 |
0.1 |
mm |
[Tray 2] |
|||||
[Tray 3] |
|||||
[Tray 4] |
|||||
[Tray 5] |
|||||
[Tray 6] |
|||||
[Tray A] |
|||||
[2 Sided] |
|||||
[Tray T1] |
|||||
[Tray T2] |
|||||
[Tray T3] |
|||||
[Tray T4] |
