Previous
Adjust erase margin of paper edge with feed.
By increasing the mask width, you can increase the paper margin at the leading edge, or trailing edge of the paper.
If misfeeding of paper occurs when using loose paper such as thin or coated paper, increase the mask width. This will increase the unprinted area at the leading edge or trailing edge of the paper and facilitate paper separation from the fusing belt.
Press [
] or [
] to adjust the mask width.
Setting Items |
Default Value |
Max. Value |
Min. Value |
Step |
Unit |
|---|---|---|---|---|---|
[Leading Edge] |
0.0 |
6.0 |
0.0 |
0.1 |
mm |
[Trailing Edge] |
This setting is not effective for paper fed from paper trays with custom paper presets. For such paper, the value specified in [Leading Edge] / [Trailing Edge] in 1210 [Erase Margin] in "Advanced Settings" takes precedence.
