Previous
This function is available for Pro 8300SO, Pro 8310S and Pro 8320S.
Adjust the position and scaling of image when original is scanned by Auto Document Feeder.
By specifying this setting, you can correct image misalignment, expansion, and shrinkage due to non-uniform paper feeding.
[Img Pos:With Feed:Side1]
Adjust the position of the image on side 1 parallel to the paper feed direction.
Press [
] to shift the image to the left (leading edge) or [
] to shift it to the right (trailing edge).
[Img Pos:With Feed:Side2]
Adjust the position of the image on side 2 parallel to the paper feed direction.
Press [] to shift the image to the right (leading edge) or [] to shift it to the left (trailing edge).
[Img Magn: With Feed]
Adjust the horizontal image scaling on sides 1 and 2.
Press [] to reduce the scaling and [] to increase it.
Setting Item |
Default Value |
Max. Value |
Min. Value |
Step |
Unit |
|---|---|---|---|---|---|
[Img Pos:With Feed:Side1] |
0.0 |
5.0 |
-5.0 |
0.1 |
mm |
[Img Pos:With Feed:Side2] |
|||||
[Img Magn: With Feed] |
% |
