Text
Text Type:
Select the text type for the prevention text in the list.
Default: [User Text]
Enter User Text:
If you select [User Text] in [Text Type:], enter user text using up to 64 single-byte characters. If you select a Latin font for [Font:], enter single-byte alphanumeric characters.
Default: [COPY]
Font:
Select a font style for the prevention text.
Optional unit is required to specify [Adobe PostScript]. For details about how to specify [Adobe PostScript], see "Configuring Option Settings for the Printer", Setup Guide.
Default:
When [PostScript Emulation] is selected:
[NimbusSans Bold]
When [Adobe PostScript] is selected:
[ArialMT]
Size:
Specify a value to adjust the size of the prevention text.
A small font may not be appropriate as a prevention copy pattern.
A font size of 50 to 300 points is effective. We recommend you select a font size of 70 to 80 points.
Default: [70]
Angle:
Specify a value in this spin box to rotate the prevention text about its central point.
An angle of 30 to 40 degrees is appropriate as a prevention copy pattern. We recommend you use this angle.
Default: [30]
Text/Pattern Effects:
Select the type of effects applied to copies or prints.
Pattern Effects: | Pattern Effects: Copy | |
---|---|---|
Text and Background | ![]() | ![]() |
Reverse Patterns (Text/Background) | ![]() | ![]() |
Background Only | ![]() | ![]() |
Text Only | ![]() | ![]() |
Default: [Text and Background]
Pattern Effects: | Pattern Effects: Copy (with the Copy Data Security function disabled) | Pattern Effects: Copy (with the Copy Data Security function enabled) | |
---|---|---|---|
Text and Background | ![]() | ![]() | ![]() |
Background Only | ![]() | ![]() | ![]() |
Default: [Text and Background]
Repeat:
Print the prevention text string repeatedly from the top left of the page.
[Position:] is not available.
Default: [Off]
Line Space:
Specify the line spacing. You can specify this setting when the [Repeat:] setting is enabled.
Default: [70]
Position:
Select a position to enter the prevention text in the list.
You can specify this setting when the [Repeat:] setting is disabled and the value of the [Angle:] setting is 0.
Default: [Center]