Specifications for the Printer
Configuration:
Desktop
Print process:
Laser beam scanning & Electrophotographic printing
4 drums tandem method
First print speed:
Full color: 7 seconds
B&W: 6 seconds
Print speed:
One-side printing: 40 pages per minute (A4)
Two-side printing: 36 pages per minute (A4)
Resolution:
600 × 600 dpi Fast (1 bit)
600 × 600 dpi Standard (2 bit)
600 × 600 dpi High Quality (4 bit)
1200 × 1200 dpi (1 bit)
Paper size:
For details, see Paper Size Specifications.
Paper weight:
For details, see Paper Type Specifications.
Paper output capacity:
Standard 500 sheets (80 g/m2, 20 lb. BOND)
Paper input capacity:
Tray | Paper capacity*1 |
---|---|
Standard paper feed tray | 500 sheets |
Bypass tray | 100 sheets |
500-sheet paper feed unit | 500 sheets |
*1 Paperweight: 80 g/m2 (20 lb. BOND)
Power requirements:
(mainly Europe and Asia)
220–240 V, 50/60 Hz, 7 A
(mainly North America)
120–127 V, 60 Hz, 12 A
Power consumption(main unit only):
(mainly Europe)
Ready: 85.4 W
During printing:
Full color: 680 W
B&W: 628 W
Maximum: 1,550 W
(mainly North America)
Ready: 84.6 W
During printing:
Full color: 693 W
B&W: 628 W
Maximum: 1,500 W
(mainly Asia)
Ready: 88.1 W
During printing:
Full color: 680 W
B&W: 628 W
Maximum: 1,550 W
The power level when the main switch is turned off and the power cord is plugged into an outlet : 1 W or less
Warm-up time (23 °C (73.4 °F), rated voltage):
24 seconds
Dimensions:
445 × 570 × 469.5 mm (17.5 × 22.4 × 18.5 inches)
Weight:
Approx. 34 kg (75.0 lb.)
Noise emission:
Sound power level:
Main unit only
Stand-by
30.9 dB (A)
Printing
Full color:
67.5 dB (A)
B&W:
65.2 dB (A)
Complete system
Stand-by
30.3 dB (A)
Printing
Full color:
67.8 dB (A)
B&W:
67.5 dB (A)
Sound pressure level:
Main unit only
Stand-by
21.0 dB (A)
Printing
Full color:
58.8 dB (A)
B&W:
58.8 dB (A)
Complete system
Stand-by
21.1 dB (A)
Printing
Full color:
61.7 dB (A)
B&W:
61.4 dB (A)
Sound power levels and sound pressure levels are actual values measured in accordance with ISO 7779.
Sound pressure levels are measured from the position of the bystander.
The complete system consists of the main unit, three 500-sheet additional paper feed units.
Memory:
2 GB
Hard disk (Optional):
320 GB
Interfaces:
Standard:
Gigabit Ethernet (10BASE-T/100BASE-TX/1000BASE-T)
USB 2.0
To use USB 2.0, a USB computer port and cable that support USB 2.0 are required.
USB Host
SD card slot
Optional:
IEEE 802.11a/b/g/n (Wireless LAN)
Parallel (Bidirectional IEEE 1284)
USB device server (10BASE-T/100BASE-TX/1000BASE-T)
Printer Language:
PCL 5c, PCL 6, PostScript 3, PDF, XPS
Fonts:
PCL 6:
93 fonts
PostScript 3, PDF:
136 fonts
Network:
Topology: The physical or logical layout of the nodes (devices) in a network (10BASE-T/100BASETX/1000BASE-T)
Protocol: TCP/IP (IPv4, IPv6)
Warm-up time may differ depending on the conditions and environment of the printer.