User GuideP C600

Setting Gradation Correction Values

Correct the gradation in two areas: bright areas (highlights), and medium areas (midtones). [Print Test Pattern 1] or [Print Test Pattern 1 for Calibration] is used to set the correction value for highlights, and [Print Test Pattern 2] or [Print Test Pattern 2 for Calibration] is used for mid tones.

Press [Menu] key, and then select the setting items using the [Down arrow key] or [Up arrow key] key.

1Select [Maintenance] Press [OK]

2Select [Quality Maintenance] Press [OK]

3Select [Color Calibration] Press [OK]

4Select [Adjust Auto Density] Press [OK]

A confirmation message appears. Press [OK] to adjust Auto Density.

A confirmation message appears when the adjustment is complete. Press [Exit].

The display returns to the [Color Calibration] screen.

5Select [Print Test Pattern 1] Press [OK] Press [Print]

6Compare the colors printed on gradation correction sheet 1 with the colors you want to reproduce.

When the selected sheet is printed, a confirmation message will appear.

7Press [Continue] Select the color you want to adjust Press [OK]

8Adjust the correction value Press [OK]

9Press [Result] Press [Print]

10Check the result by printing the calibration sheet.

11Press [Yes] Select [Print Test Pattern 2] Press [OK]

Adjust the midtones on gradation correction sheet 2 by repeating the procedure you used to adjust the color values on gradation correction sheet 1.