PS Menu
You can set conditions when using PostScript for printing.
Job Timeout
You can specify how long the printer waits before canceling the current job when the job is interrupted while being processed.
Wait Timeout
You can specify how long the printer waits before it denies receiving a job when the printer cannot determine when the job ends.
Paper Selection Method
You can specify how the source tray will be selected by specifying the default value for DeferredMediaSelection in PostScript.
Auto Select
The default value for DeferredMediaSelection is "true". The source tray that matches the paper setting specified in a print job will be selected.
Select Paper Tray
The default value for DeferredMediaSelection is "false". The source tray will be selected according to the media selection of PostScript Language Reference.
Swtchg btwn 1&2 Sided Prnt
You can specify which side of the paper to print on when the PS command is used to perform duplex printing and the "setpagedevice" command is entered.
Inactive
Retains duplex printing, and prints pages after the "setpagedevice" command has been entered on the back side of paper.
Active
Cancels duplex printing, and prints pages after the "setpagedevice" command has been entered on the front side of paper.
Data Format
You can select the data format from Binary Data or TBCP.
This setting is ineffective if a parallel or EtherTalk connection is used.
When binary data is sent from the printer driver when the printer is working with a parallel or USB connection, the print job is canceled.
When an Ethernet connection is used, the print job is canceled if:
The printer driver data format is TBCP and the data format selected using the control panel is Binary Data.
The printer driver data format is binary and the data format selected using the control panel is TBCP.
Resolution
You can specify the resolution.
Toner Saving
You can specify whether or not to reduce toner consumption when printing. When this setting is enabled, print quality may be degraded.
Color Setting
You can specify the RGB setting.
None
Fine
Super Fine
Color Profile
You can specify the color profile.
Auto
Presentation
Solid Color
Photographic
User Setting
Process Color Model
You can specify the color model.
Color
Black and White
Orientation Auto Detect
You can specify orientation auto detect.
Gray Reproduction
You can specify how to print black or gray tones.
Black/Gray by K (Black)
Black by K (Black)
CMY + K
Blk/Gry by K(Blk)-TextOnly
Black by K (Blk)-Text Only
Black/Gray by K-Strong UCR
Font Change Confirmation
You can configure the printer to display a confirmation message when an Adobe font is detected in the print data.