General Settings
Application Authentication
You can specify whether or not to enable authentication for each application (Printer, Extended Features 1 to 3).
[Printer] appears only when you have logged in as the machine administrator.
[Extended Features 1] to [Extended Features 3] appear only when Extended Features are started. For details, see Extended Features.
Recycled Paper Setting
You can specify the thickness of the recycled paper.
The paper thickness can be set for each tray separately.
For details about the actual paper weight, see Paper Type Specifications.
Color Paper Setting
You can specify the thickness of the color paper.
The paper thickness can be set for each tray separately.
For details about the actual paper weight, see Paper Type Specifications.
Letterhead Setting
You can specify the thickness of the letterhead paper.
The paper thickness can be set for each tray separately.
For details about the actual paper weight, see Paper Type Specifications.
Label Paper Setting
You can specify the thickness of the label paper.
The paper thickness can be set for Trays 2-4 and the bypass tray separately.
For details about the actual paper weight, see Paper Type Specifications.
Envelope Setting
You can specify the thickness of the envelope.
The paper thickness can be set for Trays 2-4 and the bypass tray separately.
For details about the actual paper weight, see Paper Type Specifications.
Coated Paper Setting
You can specify the thickness of the label paper.
The paper thickness can be set for Trays 2-4 and the bypass tray separately.
For details about the actual paper weight, see Paper Type Specifications.
Preprinted Paper Setting
You can specify the thickness of the preprinted paper.
The paper thickness can be set for each tray separately.
For details about the actual paper weight, see Paper Type Specifications.
Bond Paper Setting
You can specify the thickness of the bond paper.
The paper thickness can be set for each tray separately.
For details about the actual paper weight, see Paper Type Specifications.
Cardstock Setting
You can specify the type of the paper loaded in each tray. For details about available paper types, see Paper Type Specifications.
Display IP Address
You can specify whether to display the IP address.
Display Supply Info
You can specify whether or not the amount of toner is displayed on the initial screen.
Menu Protect
You can specify whether or not to protect the menu settings. If you enable this setting, you must specify a protection level.
If you want to lower the protection level, disable this setting or select [Level 1].
You may not be able to change this setting depending on the setting of the printer.
List/Test Print Lock
You can specify whether or not to prohibit List/Test printing.
You may not be able to change this setting depending on the setting of the printer.
Unit of Measure
You can switch the unit of measurement between [mm] and [inch].
Panel Key Sound
You can specify the volume for the panel key sound from four levels, or turn it off.
Display Contrast
You can specify the display density by selecting one of seven levels.
Key Repeat
You can specify whether or not to scroll the display panel when the [
] or [
] key is held down. When you enable this setting, specify the scroll speed. (If repeat time is set to "Long", scroll speed becomes slow.)
Compatible ID
You can enable or disable the Compatible ID setting.
Tray Parameters (PCL)
You can specify up to 3 parameters for PCL in each tray.
Tray Parameters (PS)
You can specify up to 3 parameters for PS in each tray.