Security Options
The table below shows the list of setting items. For details about their functions, see Security Options.
Extended Security (1/2) | Driver Encryption Key | |
Encrypt Address Book | On, Off (default) | |
Restrict User Info.Display | On, Off (default) | |
Enhance File Protection | On, Off (default) | |
Settings by SNMPv1 and v2 | Prohibit, Do not Prohibit (default) | |
Drvr Encrp Key:Encrp Strng | Simple Encryption (default), DES, AES | |
Authenticate Current Job | Login Privilege, Access Privilege, Off (default) | |
Password Policy |
| |
@Remote Service | Prohibit, Do not Prohibit(default) | |
Update Firmware | Prohibit, Do not Prohibit(default) | |
Extended Security (2/2) | Change Firmware Structure | Prohibit, Do not Prohibit(default) |
Password Entry Violation |
| |
Securty Setg for Accs Viol | Security Setting On/Off
| |
Device Access Violation | Max. Allowed No. of Access 0 to 500 Default: 100 | |
Device Access Violation | Measurement Time 10 to 30 Default: 10 | |
Device Access Violation | Authentication Delay Time 0 to 9 Default: 3 | |
Device Access Violation | Simultns Access Host Limit 50 to 200 Default: 200 | |
Service Mode Lock | On, Off (default) | |
Firmware Version | System, Web Support, NetworkDocBox, PDF, PCL, XPS, Network Support, Font EXP, PS3 Font, IRIPS Font, PS3, RPCS, Printer, Data Erase Onb, Power Saving Sys, Engine, Ic Ctlr, Ic Key, Option PctBrdg | |
Network Security Level | Level 0(default), Level 1, Level 2, FIPS 140, Custom | |
Auto Erase Memory Setting | On | HDDErase
|
Auto Erase Memory Setting | Off (default) | |
Erase All Memory | NSA | |
DoD | ||
Random Numbers | Number of Erase: Between 1 to 9 (default: 3 times) | |
Extend Auth.Mng. | ||
Transfer Log Setting | On, Off (default) | |
Machine Data Encryption | Encrypt | Format All Data, CarryOver FileSys DataOnly, Carry Over All Data(default) |
Collect Logs | Job Log | Active, Inactive(default) |
Access Log | Active, Inactive(default) | |
Eco-friendly Logs | Active, Inactive(default) |
For details, see Security Guide.