Printing with Windows (PCL 6/PostScript 3)
Duplex printing is selected as the default setting.
If you send a print job via USB 2.0 while the printer is in Sleep mode, an error message might appear when the print job is complete. In this case, check if the document was printed.
After creating a document, open the [Printing Preferences] dialog box in the document's native application.
For details, see Displaying the Printing Preferences dialog box in an application.
Make sure the [Frequently Used Settings] tab is selected.
Configure the following settings:
|
Change any other print settings as necessary. For details, see the printer driver Help. |
You can set convenient print functions on the [Detailed Settings] tab. For details, see Convenient Print Functions. |
Click [OK].
Start printing from the application's [Print] dialog box.
If [Color] is selected in the "Color/ Black and White:" list, you can print using special color outputs suitable for color vision impaired users. To use this function, click the [Detailed Settings] tab. Click the [Print Quality:Standard] menu in the "Menu:" box, and then select [On] in the "Barrier-free Color Management:" list.