Model-Specific Information
This section explains how to identify the region to which your printer belongs.
There is a label on the rear of the printer, located in the position shown below. The label contains details that identify the region to which your printer belongs. Read the label.
![Printer illustration](../../manual/image/eag335.gif)
The following information is region-specific. Read the information under the symbol that corresponds to the region of your printer.
(mainly Europe and Asia)
If the label contains the following, your printer is a Region A model:
CODE XXXX -27, -29
220–240 V
(mainly North America)
If the label contains the following, your printer is a Region B model:
CODE XXXX -17
120–127 V
Dimensions in this manual are given in two measurement units: metric and imperial. If your printer is a Region A model, refer to the metric units. If your printer is a Region B model, refer to the imperial units.
If your machine is a region A model and "CODE XXXX -27" is printed on the label, see "
(mainly Europe)" also.
If your machine is a region A model and "CODE XXXX -29" is printed on the label, see "
(mainly Asia)" also.