Registering Frequently Used Settings as a Program
You can register a "program" made of a combination of the functions used in the Copy, Fax, or Scanner, such as the scan setting, output setting, and address.
You can load the registered program easily from the application screen.
When you press the icon of a program on the Home screen, the machine applies the settings and performs the function registered in the program automatically.
You can register the following number of items as programs.
Copy: 25 items
Fax: 100 items
Scanner: 100 items
You cannot register the following settings as a program:
Copy
[Orientation] of [2 Sided/Combine]
Fax
[Subject], [Sender]
Scanner
[Sender], [PDF Security Settings], [Start Number]
A folder destination with a destination protection code cannot be registered on a program of the scanner function.
Registering Settings as a Program
First, configure the settings to be registered on the Copy, Fax, or Scanner screen, and then register them.
On the Home screen, press [Copy], [Fax], or [Scanner].
![Operation panel screen illustration](../../intro/image/icon_homescreen_en_mts034.gif)
Specify scan and output settings to be registered as a program.
![Operation panel screen illustration](../../intro/image/brc2int-en019.gif)
Press [Menu] (
).
Press [Set Current Settings to Program].
![Operation panel screen illustration](../../intro/image/ebw690.gif)
Press a program number to register the settings.
![Operation panel screen illustration](../../intro/image/met3atm2-en108.gif)
Enter a program name and select an icon, and then press [OK].
Press [Place] to place the registered icon on the Home screen.
![Operation panel screen illustration](../../intro/image/brc2int-en021.gif)
Press [Exit].
Changing the Contents of the Program
You can change a part of the program and overwrite it or change the contents and register them as a new program.
On the Home screen, press [Copy], [Fax], or [Scanner].
![Operation panel screen illustration](../../intro/image/icon_homescreen_en_mts034.gif)
Press [Menu] (
), and then press [Recall Program].
![Operation panel screen illustration](../../intro/image/ebw691.gif)
Press the program number to be changed.
![Operation panel screen illustration](../../intro/image/met3atm2-en121.gif)
Change the scan and output settings.
Press [Menu] (
), and then press [Set Current Settings to Program].
![Operation panel screen illustration](../../intro/image/ebw692.gif)
Select a program number to register the changed settings.
![Operation panel screen illustration](../../intro/image/met3atm2-en116.gif)
To overwrite the program, select the number of the loaded program.
To register the contents as a new program, select a number that is not programmed.
Enter a program name and select an icon.
Press [OK].
To change the icon or program name or to delete the program, press [Menu] (
) and operate from [Edit/Delete Program].